PBG Series Maintenance Free Boiler Pump with Liquid Lubricated Bearings

The pumps are assembled in the hydraulic module of the gas wall hung boiler for heating and cooling system, An integrated air venting system of the pump can automatically deposits the air out of the water

Product Description

The pumps are of the wet rotor type, the bearings are lubricated by the pumped liquid. The pump is combined by stator, rotor, shield cover, air vent valve and so on,

The pump is suitable for the pumping of clean, non-corrosive and hon-explosive liquids without any solid particles or fibers. The pump must not be used for the transfer of inflammable liquids such diesel oil petrol or similar liquids.

Specification

Model number	Voltage (V)	Frequency (HZ)		Rated power (W)	Maximum lift (m)	Maximum flow (L/min)
Model number	Voltage (V)	Frequency (HZ)		Rated power (W)	Maximum lift (m)	Maximum flow (L/min)
15/6-130	220	50	Gear position
			1	46	3	25
			2	85	5	40
			3	100	6	50

15PBG-6(A1)	220	50	Gear position
			1	50	3	18
			2	70	5	28
			3	100	6	35
15PBG-6(A2)	220	50	Gear position
			1	50	3	15
			2	70	5	25
			3	100	6	35
15PBG-6(A3)	220	50	Gear position
			1	46	3	30
			2	90	5	35
			3	100	6	45
15PBG-6(A4)	220	50	Gear position
			1	50	4	20
			2	70	5	28
			3	100	6	35
15PBG-6(A5)	220	50	Gear position
			1	50	4	20
			2	75	5	28
			3	100	6	35
15PBG-6(A6)	220	50	Gear position
			1	50	4	20
			2	75	5	28
			3	100	6	35
15PBG-6(A7)	220	50	Gear position
			1	46	3	30
			2	90	5	35
			3	100	6	45
25PBG-6	220	50	Gear position
			1	46	3	25
			2	85	5	40
			3	100	6	50

FAQs

1.Q：Are pumps CE/UL certified?
A：All CE certified; UL models for North America.
2.Q：How to replace mechanical seals?
A：Video guide; remote support available.
3.Q：Can pumps handle solids or viscous liquids?
A： The pump is suitable for the pumping of clean, non-corrosive and hon-explosive liquids without any solid particles or fibers. The pump must not be used for the transfer of inflammable liquids such diesel oil petrol or similar liquids.